Improper heating will result in the substrate metal melting during the cleaning process, which is not acceptable especially in the module cleaning industry. With top quality laser beam adopted, the machine is able to ablates rust and dust from tough spots and achieves high cleaning precision in variousoccasions including metal surface dust removal, oil removal, stone cleaning, etc. Mactron Laser surface cleaning machine uses high-energy pulse laser beam to work on the work piece surface. The high energy will help to remove the surface rust layer and coating oil. Adopting optical fiber laser, full enclosed stable light path, lifelong free maintenance, air cooling, the hand held laser cleaner machine is compact and environmentally friendly. Besides, the hand held laser cleaner machine can be used not only for mental pollutants, but also non-metallic work piece.
This handheld laser cleaning machine comes with a power rating of 50W, 100W or 200W. The 50W auto laser cleaning variant is fully capable of removing tough rust stains from most surfaces. It requires a single-phase 220V±10%, 50/60 Hz AC power supply, which is readily available from most power outlets in homes and industries. Its power consumption clocks at 800W, which is fairer than most other laser cleaning machines that the market has to offer. Ideally, the DIHORSE 50W hand-held laser cleaning machine will be friendly to your pocket as far as energy bills go. The DIHORSE 50W hand-held laser cleaning machine, otherwise known as the Raycus 50W, is an industrial leading rust ablator for both domestic and industrial use.
Easy to integrate in robotic cells, the door machine is extremely compact. You get to optimize your plant layout with maximum flexibility, as the robot can load parts from any direction. Enclosed in a solid industrial frame, the manual workstation is a cost-effective solution that is ideal if the cycle time allows you to manually load and unload parts.
Direct spring-operated pressure relief valves for gas, liquid, steam and multi-phase applications. Crosby pressure relief valves maintain the industry’s most extensive and capable flow facilities for testing in air, steam, and water. New technology to debut next month at NPE warns when preventive maintenance is needed, before equipment failure disrupts production. Material entering the elbow is gently deflected around the bend by the ball of rotating material without impacting or abrading the elbow wall. Because some material is continuously replenishing the rotating ball of pellets, the process is continuous, and the chamber evacuates fully along with the final portion of material being conveyed.
Electrolysis leaves the rust particles floating in the water, which you later have to dispose of. In comparison, laser cleaning is a cleaner process as the rust particles are either vaporized or turned into plasma, leaving no evidence of waste. Scrubbing off rusted surfaces exposes you to impurities which could lead to respiratory complications. Laser cleaning, on the other hand, relies on the laser beam to ablate the surface. Comparison for the roughness of the surface after CW and MOPA pulsed fiber laser cleaning.
Rust remover chemicals can get the job done, but the health implications on their use outweigh their benefit. Such chemicals are not only harsh and abrasive but also emit intense fumes. You will need to wear protective gear such as a respirator, goggles and rubber gloves before using them.
It comes with a cleaning head that you move around with your hand to target the laser beam towards specific areas of the substrate. There exist other industrial models which are operated by robots, mostly found in assembly plants. Now that you know what you get by going the laser cleaning way, you’ll want to buy a good machine that does the job right. The market will spoil you for choice with laser cleaning machines from different manufacturers, offering different capabilities, prices, and extra features.